Billi Sahara System

The Billi Sahara range dispenses boiling and ambient filtered water at the touch of a lever. The Billi Sahara features one of the smallest under counter units of its kind in the world. With space at a premium in city offices, the Sahara is focused on space savings, and can sometime be half the size of others on the market. This maximises precious under counter storage space.

A highly compact and innovative design requiring no ventilation and yet still offering market leading instant dispense rates. The Sahara is an economical alternative to the Quadra range.

watermarkwaterqualitynsf

Description

Billi Filter Cartridges

The Bill Sahara is fitted with single dual action filter incorporating sediment and chemical removal elements. All Billi Sahara filters are manufactured using bacteria and biofilm resistant materials for improved water quality. Premium filters provide better tasting water due to the high quality, carbon chemical removal filter. Sub micron rated, these filters have excellent chemical absorption, removing or reducing chlorine, volatile organic compounds (VOCs), chemicals, tastes and odours. Use only genuine filters as designed for this system. All drinking water filtration systems should be flushed after a period of non-use. If your Billi Sahara has not been used for a period of 48 hours or more, flush for one minute.

Filter Change Due Monitor

The Sahara filter change due monitor operates by counting the number of cups dispensed and the number of days elapsed until a pre-set level is reached. Once reached, the dispenser icons will briefly change to orange once every five seconds. The Sahara will continue to operate while the filter indicator is flashing. Water filters installed in areas with higher levels of sediment will experience a reduced service life. It may be necessary to change filters before the change filter indicator flashes. If particularly dirty water is noticed coming through the water supply, e.g. from other tap ware, immediately place your Billi Sahara into Holiday Mode by pressing the Pressure Relief button. This will help prevent premature blocking of the filter cartridges.

Replacement of Billi Filter Cartridge

Periodic replacement of your Bill Sahara Filter Cartridge is necessary to maintain the cleanliness of your drinking water. Billi recommends a filter replacement every 6 months or sooner if necessary. Depending on mains water supply quality. A replacement filter change service is available. If you wish to install the replacement filter cartridges yourself, your Billi representative will provide genuine Billi replacement filter cartridge sets.

Features & Benefits

Energy efficiency

The Sahara uses the Billi trademarked Thermostore tank technology and insulation materials which boasts an energy efficiency level 50 times that of a traditional hot water tank. In addition all Sahara systems include a 7 day, 24 hour time switch to conserve power, or alternatively can be put into Standby mode which conserves energy by powering down after a prescribed period of non use.

Time efficiency

With its innovative technology the Billi Sahara dispenses more cups of boiling water instantly than any tap of its kind on the market. This allows for peak periods of high demand in the teapoint or canteen environment. Billi regards instant dispense as the most important measure of a boiling tap capacity.

Ventilation

The Billi Sahara does not require cupboard ventilation or ventilation grilles. It has no cooling fan, which gives the benefit of space saving and cost reduction.

Safety

All our boiling taps come with an integrated safety switch. The red lock icon demonstrates when the safety switch is activated, simply press the switch to release the lock and allow full use of boiling water. The system will revert to safety mode after 8 seconds of non use.

Splash free delivery

Electronic control of boiling water delivery ensures user safety. The flow is momentarily slowed as the water exits the dispenser, eliminating splashing as the water enters the cup.

Designer taps

Following collaboration with architects, designers, engineers and end users, Billi has created an exceptional range of dispensers to suit our Boiling and Ambient systems. Comprising three different styles of tap in four finishes and a corresponding drainage font, this range ticks all the boxes with clean sophisticated style, advanced safety technology, ease of installation and energy efficiency.

Premium filtration

Billi premium filters ensure that health threatening pollutants and impurities such as sediment, chemicals, heavy metals and pesticides are removed leaving you with refreshingly clean drinking water, every time.

Effectively Removes

  • Aluminium
  • Barium
  • Cadmium
  • Chlorine
  • Chromium
  • Copper
  • Cryptosporidium & Giardia
  • Cysts
  • e. Coli Bacteria
  • Heavy Metals
  • Hydrocarbons
  • Iron
  • Lead
  • Manganese
  • Mercury
  • Nitrate
  • PCB’S
  • Potassium
  • Radium
  • Sediment, Dirt & Rust
  • Selenium
  • Sodium
  • Taste
  • Odour

Specifications

Dimensions 230W x 320H x 130D mm
Filter output 5,000 litres*
Max flow rate 3 litres per minute
Micron rating 0.9 micron absolute

*It is recommended that the filter cartridge be replaced every 6-12 months according to water quality and usage.

Title